Asus MAXIMUS VII IMPACT User Manual page 82

•
•
•
•
* LAN ports LED indications
Activity Link LED
Status Description
OFF No link
ORANGE Linked
BLINKING Data activity
** Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
LINEIN
LINEOUT
MIC
HEADPHONE
(Front panel)
•
•
2-20
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows OS environment and after the USB 3.0 driver installation.
®
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
Speed LED
Status
OFF
ORANGE
GREEN
Headset 4.1-channel
2.1-channel
Line In Rear Speaker Out
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Mic In Mic In
– –
Jack-retasking supports 4.1, 5.1, and 7.1-channel audio outputs. Launch Realtek HD
Audio Manager to configure the jack-retasking setting.
To support 7.1 channel audio output, ensure that your chassis has an HD audio
module on the front panel.
8 series chipset, all USB devices connected to the
®
Description
10 Mbps connection
100 Mbps connection
1 Gbps connection
5.1-channel
Rear Speaker Out
Bass/Center
–
Chapter 2: Basic Installation
ACT/LINK
SPEED
LED
LED
LAN port
7.1-channel
Rear Speaker Out
Bass/Center
Side Speaker Out