Asus MAXIMUS VII IMPACT User Manual page 110

CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Manual Adjustment]
[Auto]
[Standard]
[Optimized]
[Extreme]
[Power Phase
Response]
DO NOT remove the thermal module when setting this item to [Extreme] and [Manual
Adjustment]. The thermal conditions should be monitored.
•
•
CPU Power Duty Control [T.Probe]
CPU Power Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe]
[Extreme]
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
DIGI + VRM CPU Current Capability provides wider total power range for overclocking.
A higher value setting gets higher VRM power consumption delivery and extends the
overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking or under a high CPU loading for extra power
support.
3-24
Set the phase control on its default setting.
Set the phase control based on the CPU command.
Set the ASUS optimized phase tuning profile.
Set the full phase mode
Set manually to a faster phase response to increase system
performance or to slower phase response to increase DRAM
power efficiency.
The item VRM Spread Spectrum disappears when you set the CPU Power Phase
Control to [Extreme].
The following item appears only when you set the CPU Power Phase Control to
[Power Phase Response].
Power Phase Response [Fast]
This item allows you to set a response for the CPU power phase response.
The reaction time will take longer when the regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
Chapter 3: BIOS setup