Asus MAXIMUS VII IMPACT User Manual page 145

Option ROM Messages [Enabled]
[Enabled] The option ROM messages are shown during POST (Power-on Self-Test).
[Disabled] Only the ASUS logo is shown during POST.
Interrupt 19 Capture [Disabled]
When set to [Enabled], it allows the option ROMs to trap Interrupt 19.
Configuration options: [Enabled] [Disabled]
Above 4G Decoding [Disabled]
This item enables or disables 64-bit capable devices to be decoded in above 4G address
space if your system supports 64-bit PCI Decoding.
Configuration options: [Enabled] [Disabled]
Setup Mode [Advanced Mode]
[Advanced Sets Advanced Mode as the default screen for entering the BIOS setup
Mode] program.
[EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program.
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto] The system automatically detects the bootable devices and the add-
on devices.
[Enabled] For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
[Disabled] Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows
The following items appear when you set the Launch CSM to [Enabled].
Boot Devices Control [UEFI and Legacy OpROM]
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only]
[UEFI only]
Boot from Network Devices [Legacy OpROM first]
This item allows you to select the type of network devices that you want to
launch.
Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore]
ASUS MAXIMUS VII IMPACT
®
UEFI mode.
®
UEFI mode.
3-59