Asus MAXIMUS VII IMPACT User Manual page 111

CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to
adjust the value. The values range from 120 to 141.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Input Boot Voltage [Auto]
Set a VCCIN for the CPU right at boot. Use the <+> and <-> keys to adjust the value.
The values range from 0.80V to 2.440 with a 0.010V interval.
DRAM Current Capability [100%]
This item allows you to adjust the total power range for DRAM overclocking. A higher
value provides a wider total power range and extends the overclocking frequency
change simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Switching Frequency [Auto]
This item affects the overlocking range and system stability. Configure to a higher
frequency to increase the overclocking range or a lower frequency to enhance the
system stability.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
Tweakers' Paradise
The subitems in this menu allow you to set the CPU ratio and features.
BCLK Tuning
VCCIN Shadow Voltage [Auto]
This item allows you to set a pseudo voltage for VCCIN. Use the <+> or <-> key to
adjust the value. The values range from 0.800V to 2.440V at 0.010V increment.
Termination Anti-Aliasing [Auto]
Set this item to [Enabled] to smooth out the change of the PLL Termination Voltage,
which helps yield a better overclocking result.
Configuration options: [Auto] [Disabled] [Enabled]
Initial PLL Termination Voltage [Auto]
Initial Voltage at which CPU BCLKs are terminated. Maintaining a level close to CPU
Input Voltage helps base clock overclocking. Use the <+> or <-> key to adjust the
value. The values range from 0.00V to 3.00V at 0.00625V increment.
PLL Termination Reset Voltage [Auto]
Set a phase-locked loop termination reset voltage. Use the <+> or <-> key to adjust the
value. The values range from 0.00V to 3.00V at 0.00625V increment.
Eventual PLL Termination Voltage [Auto]
Set an eventual phase-locked loop termination voltage. Use the <+> or <-> key to
adjust the value. The values range from 0.00V to 3.00V at 0.00625V increment.
ASUS MAXIMUS VII IMPACT
3-25