Asus MAXIMUS VII IMPACT User Manual page 142

Chassis Fan 1-3 Q-Fan Control [Enabled]
These items allow you to enable or disable the chassis fans' Q-Fan control feature of your
motherboard.
Configuration options: [Disabled] [Enabled]
Chassis Fan 1-3 Speed Low Limit [300 RPM]
This item allows you to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1-3 Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following items appear only when you set the Chassis Fan Profile to [Manual].
3-56
Set to make the chassis fan adjust automatically depending on the
chassis temperature.
Set to minimize the fan speed for quiet chassis fan operation.
Set to achieve maximum chassis fan speed.
Set to assign detailed fan speed control parameters.
Chassis Fan 1-3 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40°C to 90°C.
Chassis Fan 1-3 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum chassis fan duty cycle. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Middle Temperature [45]
Use the <+> or <-> keys to set the value for Chassis Fan Middle
Temperature.
Chassis Fan 1-3 Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the chassis fan middle duty cycle. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Lower Temperature [40]
Use the <+> or <-> keys to adjust the chassis fans' lower temperature. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The
values may differ via Qfan tuning.
Chapter 3: BIOS setup