Asus MAXIMUS VII IMPACT User Manual page 100

Load 200 BLCK Profile
Configuration options: [OK] [Cancel]
Load 3700 DRAM Freq. with 2x4GB in CHA
Configuration options: [OK] [Cancel]
Load 3800 DRAM Freq. with 2x4GB in CHA
Configuration options: [OK] [Cancel]
Load 3842 DRAM Freq. with 2x4GB in CHA
Configuration options: [OK] [Cancel]
Load 3900 DRAM Freq. with 2x4GB in CHA
Configuration options: [OK] [Cancel]
Load 3930 DRAM Freq. with 2x4GB in CHA
Configuration options: [OK] [Cancel]
Ai Overclock Tuner [Auto]
This item allows you to select the CPU overclocking options to achieve the desired CPU
internal frequency. Select any of these preset overclocking configuration options:
[Auto]
[Manual]
[X.M.P.]
•
•
CPU Strap [Auto]
This item allows you to select a strap close to your target BCLK (base clock) for an
extreme overclocking, or leave it at [Auto] for the BIOS to upgrade.
Configuration options: [Auto] [100MHz] [125MHz] [167MHz] [250MHz]
PLL Selection [Auto]
This item is set to LC PLL by default for better stability. Select SB PLL when the BCLK
(base clock) frequency is far away from 100 MHz. This may affect the function of other
devices that need precise clock jitters.
Configuration options: [Auto] [LC PLL] [SB PLL]
Filter PLL [Auto]
This item allows you to select a BCLK (base clock) mode when using a very high BCLK
to improve the overclocking capability.
Configuration options: [Auto] [Low BCLK Mode] [High BCLK Mode]
3-14
Loads the optimal settings for the system.
Allows you to individually set overclocking parameters.
If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
The [X.M.P.] configuration option appears only when you install memory modules
supporting the eXtreme Memory Profile (X.M.P.) Technology.
The following items appear only when you set the Ai Overclock Tuner to [Manual] or
[X.M.P.].
Chapter 3: BIOS setup