ZyXEL Communications GS1910 series User Manual page 53

In Switch B:
Access the Switch through http://192.168.1.1. Log into the Switch by entering the username
1
(default: admin) and password (default: 1234).
Go to Configuration > Port Mirroring. Select Enabled in the Mode field to activate mirroring on
2
the Switch.
Set Type to Intermediate to configure the intermediate ports that help forward traffic.
3
Enter the remote port mirroring VLAN ID number (100 in this example). The Switch will
4
automatically create the remote port mirroring VLAN and configure the intermediate ports as a
member of this VLAN.
Configure ports (3 and 4 for example) to act as the intermediate ports that connect to Switch A and
5
Switch C.
Click Save.
6
Go to Configuration > MAC Table to disable MAC address learning on the intermediate ports so
7
that the Switch will NOT filter or forward a frame based on the frame's destination MAC address, or
even drop the frame whose MAC address is not in the MAC address table on these ports.
Chapter 5 Tutorials
GS1910/XGS1910 Series User's Guide
53