Creating A Vlan For Port Which Is Not Ieee 802.1X Enabled - ZyXEL Communications GS1910 series User Manual

in order to access the ports. You want to assign clients that connect to ports 1, 2 or 3 to a guest
VLAN (200 for example) when they fail to authenticate with the authentication server. In this guest
VLAN, clients can surf the Internet through a gateway attached to port 10, but are not allowed to
access other network resources, such as the mail server or local data base.
Guest VLAN 200
Ports 1, 2, 3 and 10

5.5.1 Creating a VLAN for Port which is not IEEE 802.1x enabled

Follow the steps below to configure port 10 as a member of VLAN 200.
Access the web configurator through the Switch's port which is not in VLAN 200.
1
Click Configuration > VLANs > VLAN Membership in the navigation panel. Click Add New
2
VLAN to create VLAN2.
Enter 200 in the VLAN ID field and enter a descriptive name (VLAN200 for example) in the VLAN
3
Name field for this VLAN.
Configure port 10 to be a permanent member of the VLAN.
4
Click Save to save the settings to the Switch.
5
Chapter 5 Tutorials
VLAN 1
Internet
GS1910/XGS1910 Series User's Guide
37