ZyXEL Communications GS1910 series User Manual page 49

2
Access the Switch through http://192.168.1.1. Log into the Switch by entering the username
1
(default: admin) and password (default: 1234).
Go to Configuration > Port Mirroring. Select Enabled in the Mode field to activate mirroring on
2
the Switch.
Set Type to Mirror to do mirroring in one standalone switch.
3
Configure port 2 to act as a destination port to which the Switch copy traffic from the source
4
port(s).
Select the direction of traffic flow you want to copy (Both in this example) on port 7.
5
Click Save. You then should be able to receive a copy of the traffic passing through port 7 to
6
examine it in more detail without interfering with the traffic flow on the original port.
Chapter 5 Tutorials
7
GS1910/XGS1910 Series User's Guide
49