ZyXEL Communications GS1910 series User Manual page 25

Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION
PVLAN This link takes you to a screen where you can create private VLANs on the Switch.
Membership
This screen is not available on the XGS1910-24 or XGS1910-48.
Port Isolation This link takes you to a screen where you can enable port isolation on ports in a private
VLAN or IEEE 802.1Q tagged VLAN to prevent communication between ports in the same
VLAN.
VCL
MAC-based This link takes you to a screen where you can configure a MAC-based VLAN.
VLAN
Protocol-based This link takes you to a screen where you can configure a protocol-based VLAN.
VLAN
Voice VLAN
Configuration This link takes you to a screen where you can configure a Voice VLAN for voice traffic.
OUI This link takes you to a screen where you can configure an Organizationally Unique
Identifier (OUI) address table that can be used for telephony devices detecting.
QoS
Port This link takes you to a screen where you can configure QoS classification settings for
Classification
incoming traffic on a port.
Port Policing This link takes you to a screen where you can configure QoS policers that allow you to
limit the transmission rate of incoming traffic on a port.
Port Scheduler This link takes you to a screen where you can configure QoS queues for outgoing traffic
on a port.
Port Shaping This link takes you to a screen where you can configure traffic shaping for a queue and a
port.
Port Tag This link takes you to a screen where you can configure how the Switch sets the priority
Remarking
level and drop eligible indicator field in the VLAN tag for traffic on an egress port.
Port DSCP This link takes you to a screen where you can configure whether and how the Switch
modifies the DSCP value for traffic on a port.
DSCP-Based This link takes you to a screen where you can configure the DSCP to QoS class and drop
QoS
precedence level mapping for all incoming traffic.
DSCP This link takes you to a screen where you can configure the DSCP translation/mapping
Translation
table for incoming and/or outgoing traffic.
DSCP This link takes you to a screen where you can configure the DSCP to QoS class mapping
Classification
table.
QoS Control This link takes you to a screen where you can configure a QoS control list to classify and
List
give different drop precedence levels and DSCP numbers to different packet types.
Storm Control This link takes you to a screen where you can limit the number of unicast, broadcast and
unknown packets the Switch receives per second on the ports.
WRED This link takes you to a screen where you can configure the weighted Random Early
Detection (RED) settings for QoS queues 0 to 5.
Port Mirroring This link takes you to a screen where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
UPnP This link takes you to a screen to enable UPnP.
Stack This link takes you to a screen to enable stacking and manage other members in the
stack.
sFlow This link takes you to a screen where you can configure an sFlow receiver (collector) and
sFlow data sampling settings on the Switch.
Monitor
Chapter 4 The Web Configurator
GS1910/XGS1910 Series User's Guide
25