ZyXEL Communications GS1910 series User Manual page 39

Select the Reauthentication Enabled check box to have a subscriber periodically re-enter his or
2
her username and password to stay connected to the port.
Select the Guest VLAN Enabled check box and enter the guest VLAN ID (200 in this example) to
3
enable the guest VLAN on the Switch. The Switch will automatically create the guest VLAN and
configure the IEEE 802.1x-enabled ports as a member of the guest VLAN.
Set Admin State to Port-based 802.1x for ports 1 to 8 to turn on IEEE 802.1x authentication on
4
these ports.
Select the Guest VLAN Enabled check box on ports 1, 2 and 3. The Switch puts unauthenticated
5
clients in the specified guest VLAN.
Click Save. Clients that attach to port 1, 2 or 3 and fail to authenticate with the RADIUS server now
6
should be in VLAN 200 and can access the Internet via the Internet access gateway connected to
port 10 which is also in VLAN 200, but cannot communicate with devices in VLAN 1.
Chapter 5 Tutorials
GS1910/XGS1910 Series User's Guide
39