Camera Installation; Installing The Lens - Honeywell HCC10 User Manual

Camera Installation

Installing the Lens

1. Remove the lens mount cap from the camera
(if present).
2. Screw the lens clockwise onto the lens mount of
the camera (A). If you are using a C-mount lens,
you will need to attach the C-mount adapter first.
3. Connect the auto-iris drive cable to the 4-pin
interface on the side of the camera (B).
B
800-15952 - A - 09/2013
Use a Suitable Lens
• The camera can use CS-mount lenses or C-mount
lenses. C-mount lens require a C-mount adapter.
A
• Use a suitable lens for the required field of view.
The field of view for different focal length can be
obtained using the following formula:
Pin Assignment
Pin
1 3
1
2
3
4
2 4
1
Signal
Damping coil (–)
Damping coil (+)
Drive coil (+)
Drive coil (–)
9