Table of Contents
Advertisement
Precautions
Operating
Before using the camera, make sure the power supply
and video output are properly connected. When
operating the camera, if any abnormal condition or
malfunction is observed, stop using the camera
immediately and call your equipment dealer.
Handling
Do not disassemble the camera. Never touch the
internal parts of the camera.
Do not drop the camera or subject it to shocks and
vibrations.
When attaching or removing the lens, take care that no
moisture or dust enters the camera body.
Avoid viewing bright objects (such as light fixtures) for
extended periods, or bright vertical and horizontal lines
may appear on the screen.
4
Installation and storage
Do not point the camera at the sun as this could
damage the camera whether it is operating or not.
Do not install the camera where the temperature could
exceed the allowable range. Make sure the ambient
temperature is less than 104°F (40°C) in installations
intended for long term continuous operation.
Avoid installing or storing the camera in locations where
the camera may be exposed to:
• water/rain
• humidity
• dust
• radiation
• mechanical vibrations
• strong magnetic fields and electrical signals
Daily check
To maintain proper operation for surveillance use,
check the camera output every day for a clear and
focused picture.
www.honeywell.com/security
1
Advertisement
Table of Contents
