Honeywell HCC10 User Manual page 21

SETUP MENU
PRIVACY
DAY/NIGHT
NR
CAMERA ID
SYNC
LANGUAGE
CAMERA RESET
BACK 
EXIT 
• In AUTO mode, the camera switches automatically
between day (color) mode and night (b/w) mode
based on the lighting environment.
• In COLOR mode, the camera is set to day mode
only. Used for normal lighting conditions.
• In B/W mode, the camera is set to night mode only.
Used for low lighting conditions.
• In EXT1 and EXT2 modes, the camera switches
between day (color) mode and night (b/w) mode
based on an external day/night control.
800-15952 - A - 09/2013
OFF

AUTO

OFF
INT
ENGLISH
SAVE ALL
Auto Mode
• Press the joystick to enter the configuration menu.
DAY/NIGHT
BURST ON
DELAY CNT
DAY->NIGHT
NIGHT->DAY
RETURN 
BURST Set to ON or OFF to enable or disable burst
signal synchronization.
DELAY Set the delay time before the day/night
CNT transition. Select a value between 0 and 255.
DAY-> Set the day-to-night switching threshold.
NIGHT Select a value between 0 and 255.
NIGHT-> Set the night-to-day switching threshold.
DAY Select a value between 0 and 255.
010
003
005
21