The Image Is Not Perfect; File Load Filter - Barco HDX User And Installation Manual

9. Image
Depending on the File Load Filter setting a full list or a list fitting the selected source is displayed.
When staying for at least 3 seconds on the same file selection after scrolling through the list of image files a pre-load is started.
Image 9-63
Load file
3. Use the ▲ or ▼ key to select the desired file and press ENTER to load this file.

The image is not perfect

If the displayed image is not correct after selecting the best fitting file, go to the Timings menu and change the file settings.
9.6.3

File Load Filter

About the filter setting
Depending on the load file filter, the load list can be reduced to the fitted files or can be expanded to show all files.
[Fit] : reduced list corresponding with the input source.
[All] : full list with all available files in the projector.
How to set up
1. Press Menu to activate the menus and select Image → Image File Services → File Load Filter.
Image 9-64
Main menu, Image
124
Image 9-65
Image, image file services
R5905032 HDX SERIES 20/11/2014