Connecting External Speakers Or A Sound Bar; Digital Audio - Dynex DX-40D510NA15 User Manual

30
DX-40D510NA15

Connecting external speakers or a sound bar

Digital audio

On your TV
Digital coaxial
audio cable
connector
Digital coaxial
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT (Coaxial) jack on the back of your TV and
to the coaxial AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the Audio menu to PCM. See the Digital Audio/SPDIF option in
"Adjusting sound
Digital speaker
system
Sound bar
settings" on page 45.
www.dynexproducts.com
Digital coaxial
audio cable
Dynex 40" LED TV
Back of TV