Connecting To An Antenna - Dynex DX-RCRT20-09 User Manual

Setting up your TV

Connecting to an antenna

To connect a combination VHF/UHF antenna (single 75 ohm cable or 300 ohm twin-lead
wire) or cable TV:
• Connect the 75 ohm cable from the combination VHF/UHF antenna or cable TV to the
If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, you may need to use a
300-75 ohm matching transformer.
75 ohm coaxial cable
from antenna, cable
wall outlet, or
descrambler box
Power cord
antenna input jack on the TV.
Antenna input jack
Notes:
- We recommend that you use 75 ohm coaxial cable to eliminate interference and noise.
- Antenna cables should not be bundled with electrical power cords.
- If the antenna is not installed correctly, see your dealer for assistance.
VHF
Y Cb Cr
IN
OUT 75 ohm coaxial cable
ANT IN
S-VIDEO VIDEO L-AUDIO-R
IN
- OR -
300-75 ohm
matching
transformer
UHF
Antenna input jack
13