Connecting External Speakers Or A Sound Bar; Digital Audio - Dynex DX-48D510NA15 User Manual

Dynex 48" LED TV

Connecting external speakers or a sound bar

Digital audio

On your TV
Digital coaxial
audio cable
connector
Digital coaxial
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT (Coaxial) jack on the side of your TV and to
the coaxial AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the Audio menu to PCM. See the Digital Audio/SPDIF option in
"Adjusting sound
Digital speaker
system
Sound bar
Digital coaxial
audio cable
settings" on page 44.
www.dynexproducts.com
DX-48D510NA15
Side of TV
29