Analog Audio - Dynex DX-40D510NA15 User Manual

Dynex 40" LED TV

Analog audio

On your TV
Audio cable
connector
/AUDIO OUT
jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the
the analog speaker system.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
Analog speaker
system
Sound bar
/AUDIO OUT jack on the back of your TV and to the AUDIO IN jacks on
www.dynexproducts.com
Audio cable
Back of TV
31
DX-40D510NA15