Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Dynex DX-40D510NA15 User Manual

Dynex 40" LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the
DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to highlight HDMI1 or HDMI2, then press ENTER.
"What connection should I
DVD or Blu-ray player
HDMI cable
www.dynexproducts.com
DX-40D510NA15
use?" on page 12.
Side of TV
19