Component Video (Better) - Dynex DX-40D510NA15 User Manual

Dynex 40" LED TV

Component video (better)

Notes
On your TV
Component
Audio cable
video cable connectors
connectors
Component
Audio jacks
video jacks
1 Make sure that your TV's power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the component video cable (not provided) to the VIDEO/Y, P
jacks and AUDIO L and R jacks on the back of your TV and to the component jack(s) on the game console.
Notes
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that
came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Comp/AV, then press ENTER.
• Your game console may require a special component video cable. See
the documentation that came with your game console or check the
manufacturer's Web site.
• Cables are often color-coded to match color-coded jacks.
• The VIDEO/Y, P , and P video jacks (used to connect a component
B R
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
• When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
www.dynexproducts.com
DX-40D510NA15
Console-specific component
video and audio cable
Back of TV
23
Game
console
, and P video
B R