Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Dynex DX-16E220NA16 User Manual

20
DX-16E220NA16

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's AC power adapter is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the DVD or
Blu-ray player.
3 Plug your TV's AC power adapter into a power outlet, then turn on your TV and DVD or Blu-ray.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or
DVD or Blu-ray player
to highlight HDMI1 or HDMI2, then press ENTER.
"What connection should I
HDMI cable
www.dynexproducts.com
use?" on page 14.
Side of TV
Dynex 16" LED TV