Hardware Overview; Connectors And Buttons - Axis Q1932–E User Manual

AXIS Q1932–E PT Mount Thermal Network Camera

Hardware Overview

Hardware Overview
NOTICE NO NO TICE TICE
Never remove both the sunshield and the PT Mount bracket. One of them must remain to keep the camera assembly intact.
1
Sunshield
2
RS485/RS422 connector
3
Power connector
4
Network connector
5
Back cover
6 Status indicator LED
7
microSD memory card slot
8 Control button
9
PT Mount bracket

Connectors and Buttons

For technical specifications, see page 53.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see .
1
2
3
4
9
6
5