Advertisement
7
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning the software
installation.
1
M ake sure the printer is
NOT CONNECTED to your
computer.
Windows
: If you see a Found
®
New Hardware screen, click
Cancel and disconnect the USB
cable. You can't install your
software that way.
2
Insert your product CD.
3
W indows: If you see the AutoPlay
window, click Run Setup.exe. If you
see the User Account Control screen,
click Yes or Continue.
Mac OS X: Double-click the
4
S elect your language, if necessary.
5
C lick Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
6
W hen you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Epson icon.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a temporary USB cable connection to simplify wireless
setup. After the printer is connected to the network, you will
be prompted to remove the cable.
If you're using Mac OS X 10.6 or 10.7, you will need to use
the control panel on the printer to select wireless settings.
Follow the instructions on your computer screen during
software installation; they will explain how to connect the
printer wirelessly this way.
M ake sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
Wired network connection
Make sure you have an Ethernet
included). You must install the software on every computer
from which you want to print.
Direct USB connection
Make sure you have a USB cable ready.
Any problems?
If you experience problems during setup, see below:
The printer makes a loud noise and you see an error
message when you turn it on.
Make sure you remove the protective foam and plastic from
inside the printer.
Network setup was unsuccessful.
• Make sure you select the right network name.
• I f you see a firewall alert message, click Unblock or Allow
to let setup continue.
• I f your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
Use the function buttons to select uppercase (AB12),
lowercase (ab12), symbols (!#%@), or spaces, and to
delete characters (
P ress
,
,
function button. Press OK to select it.
When you're finished, highlight Done and press OK.
The printer's screen is dark.
Press any button to wake the printer from sleep mode.
network cable (not
®
).
Function buttons
, or on the printer to highlight a letter or
Hide quick links:
Advertisement
