Advertisement
6
Install software
Note:
If your computer does not have a CD/DVD drive, you can
download the software from the Epson website. (For more information,
see "Epson technical support".)
Caution:
Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Make sure the printer is NOT CONNECTED to your
computer.
Windows
:
If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the product CD.
3
Windows: If you see the AutoPlay window, click
Run Setup.exe. If you see the User Account Control
screen, click Yes or Continue.
Mac OS
X: Double-click the
®
4
Select your language, if necessary.
5
Click Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
6
When you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Epson icon, if necessary.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the fi rst installation, we recommend
using the USB cable to simplify wireless setup. After the printer
is connected to the network, you will be prompted to remove
the cable.
If you're using Mac OS X 10.6 or 10.7, or you don't have a USB
cable, you will need to use the buttons on the printer to select
wireless settings. Follow the instructions on your computer
screen during software installation; they will explain how to
connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set up
your network.
Direct USB connection
Make sure you have a USB cable ready.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name.
• If you see a fi rewall alert message, click Unblock or Allow to
let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc) letters,
make sure you enter them correctly.
Press
or
to scroll through characters. Press
switch between uppercase (ABC), lowercase (abc), or
numbers (123). Press
and
to delete a character.
When you're fi nished, press the OK button.
The printer's screen is dark.
Press any button to wake your product from sleep mode.
to move to the next character,
to
Hide quick links:
Advertisement
