Color Offset - ADJ Inno Spot Elite User Instructions

Inno Spot Elite
To enter the OTIL (Home position adjustment) & Gobo wheel adjust-
ment submenu, press the ENTER button for at least 3 seconds. In
this submenu you are able to adjust the home position of the pan, tilt,
color wheel, gobo wheel, RGobo (Rotating) wheel, prism, R (Rotating)
Prism, and focus position.
Pan Offset
- Adjustment of the pan home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Pan Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Tilt Offset
- Adjustment of the tilt home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Tilt Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 16
System Menu Inno Spot Elite

Color Offset

wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Color Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Gobo Offset
wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Gobo Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
RGobo Offset
ing gobo.
1. Press the ENTER button for at least 3 seconds, then press the
UP or DOWN buttons so that "RGobo Offset" is displayed, press
ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Prism Offset
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Prism Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
- Home setting adjustment for the color
- Home setting adjustment for the gobo
- Home setting adjustment for the rotat-
- Home setting adjustment for the prism.
ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 17
System Menu