Care And Use - DCS -IVH-48 Care And Use Installation Instructions

Ca re And Use
CONTROLS
We recommend you turn your hood on before you begin cooking to establish fresh airflow. After you
have finished cooking, let the blower run for a few minutes to clear the air and help keep the kitchen
fresh and clean.
BLOWER
The Blower is operated with 2 controls.The switch adjacent to the speed control turns the blower
on/off, while the speed control adjusts the blower speed.Turn the speed knob clockwise to increase
and counterclockwise to decrease the blower speed.
HOOD LIGHTING
A single switch controls the 4 halogen lights.The switch controls the brightness of the lights with
Hi/Off/Low. Use only 50w Max. Halogen Narrow Flood replacement bulbs.
CAUTION: Halogen lamps are constructed of a glass bulb with a pressurized internal filament tube
that operates at high temperatures and could be discharged into the fixture enclosure
and/or surrounding environment, thereby creating a risk of personal injury of fire.When
replacing the bulb, let the bulb cool, and assure that power to light has been turned off.
Never allow a hot bulb to come into contact with water.
Do Not Touch the Hood Light Bulbs when they are in use.They may be hot enough to cause injury.
Halogen Light Bulb
Blower
Hood Lights
Blower Variable Speed Control
12