DCS -IVH-48 Care And Use Installation Instructions page 10

Soffit Installation
SOFFIT FOR DCS-IVH-48 ISLAND VENT HOOD
The dimensions given are for a 1/2 inch drywall duct cover.
1) Create a soffit structure and attach the soffit brackets as illustrated in figure 1. Refer to the
installation guidelines on Page 7.
2) Attach the soffit support bars as shown in figure 4.
3) After adequately securing the soffit structure to
the ceiling joist, attach the Island Vent Hood with
the 6 mounting screws provided, figures 5 and 6
show the location of the mounting screws.
Figure 5 gives soffit dimensions allowing for a 1/2 inch
duct cover.
SIDE VIEW for DCS-IVH-48 SOFFIT STRUCTURE
The dimensions given are for a 1/2 " drywall.
28 "
7/8
10 "
7/8
TOP VIEW of DCS-IVH-48
9
ATTACH SOFFIT
BRACKETS
ON 4 CORNERS
OF THE
SOFFIT STRUCTURE
2 SUPPORT
BARS
HEIGHT WILL
VARY
ACCORDING
TO CEILING
HEIGHT
7 /
28
"
8
4 SOFFIT
BRACKETS
SOFFIT ASSEMBLY
FOR DCS-IVH-48
The dimensions given are for a 1/2 " drywall.
1 " x 3 " Soffit
1/2 1/2
Wood Structure
1 " x 3
1/2
3 "centerline
1/2
to centerline measurement
from screw to screw
FIG.4
7 /
10
"
8
FIG.5B
" Soffit
1/2
(4) soffit
brackets