How To Change The Chain And Rim - Husqvarna K960 Chain Operator's Manual

How to change the chain and rim

Pull the handle backwards.
Press the spring down on the chain tensioner handle.
Unscrew the adjusting bar nut anti-clockwise.
Remove the cover.
Remove the bar and chain.
14 –
English
ASSEMBLY
Remove the spring holding the two "half-moons" using a
screwdriver.
Remove the "halfmoons", the cup guard, o-ring and the drive
sprocket.
Assemble the parts in the reverse order.
IMPORTANT! During all reassembling, make sure that the
outer cover fits in to the inner cover, the covers may be
damaged otherwise.
Make sure that the chain adjuster pin fits into the hole on the
bar.
Turn the bar when replacing the chain for maximum bar life.