Assembly; How To Tension The Chain - Husqvarna K960 Chain Operator's Manual

How to tension the chain

If the play between drive link and bar is bigger than 12 mm,
the chain is too loose and must be tightened.
Opening the adjust screw cover.
Pull the handle backwards.
Continue to move the handle down-wards until you start to
tension the chain.

ASSEMBLY

Hold the bar upwards as you move the handle forward.
Lock the chain tension by tightening the counter screw.
Close the adjust screw cover.
NOTE!
A correctly tightened chain should be easy to pull around by
hand.
– 13
English