How to tension the chain
•
If the play between drive link and bar is bigger than 12
mm, the chain is too loose and must be tightened.
•
Opening the adjust screw cover.
•
Pull the handle backwards.
•
Continue to move the handle down-wards until you start to
tension the chain.
ASSEMBLY
>12 mm
•
Hold the bar upwards as you move the handle forward.
•
Lock the chain tension by tightening the counter screw.
•
Close the adjust screw cover.
A correctly tightened chain should be easy to pull around by
hand.
How to change the chain and rim
CAUTION! If the chain has been used and is
!
refitted it must be fitted in the same working
direction as earlier in order to reduce
segment wear and to obtain full cutting
capacity directly.
The chain must never be fitted the wrong
way round. The raker should guide the
segment at the right height in the cut.
Turn the bar when replacing the chain for maximum bar life.
– 9
English