Tightening The Bar Nut - Husqvarna K960 Chain Operator's Manual

ASSEMBLY

Tightening the bar nut

If the bar and chain tensioner handle feel loose, the bar nut
must be tightened to achieve the correct tension moment in
the nut. This so that the bar does not fit loosely.
Move the lever to its rear, lower position. Push in the spring on
the chain tensioner handle and turn the bar nut clockwise by
hand.
Release the spring. Hold the bar upwards as you move the
handle forward. Note that the arm's mechanical stop shall not
be reached. The stop prevents the arm from pointing forwards
and prevents cutting.
– 15
English