Table of Contents
Advertisement
Before using a new diamond chain
saw
•
Please read the operator's manual carefully.
•
Check the assembly and adjustment of the diamond
chain, see chapter "Assembly".
•
Start the engine and check the carburettor setting, see
chapter "Maintenance", section "Carburettor". If the
carburettor setting is correct, the diamond chain shall
stand still at idle speed. Setting of the idle speed is
described in the Operator's Manual. Set the correct speed
according to these instructions. Do not use the diamond
chain saw if the idle speed is not adjusted correctly!
•
Let your Husqvarna dealer regularly check the machine
and make essential adjustments and repairs.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.
WARNING! A diamond chain saw is a
!
dangerous tool if used carelessly or
incorrectly and can cause serious, even fatal
injuries. It is very important that you read
and understand the contents of this
operator's manual.
WARNING! The ignition system of this
!
machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with pacemakers. To
reduce the risk of serious or fatal injury, we
recommend persons with pacemakers to
consult their physician and the pacemaker
manufacturer before operating this machine.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
All information and all data in the Operator's Manual were
applicable at the time the Operator's Manual was sent to print.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.
SAFETY INSTRUCTIONS
You will find the following labels on your power cutter:
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
emissions requirements. Category C = 50 hours, B = 125
hours, and A = 300 hours.
Personal protective equipment
WARNING! You must use approved personal
!
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
•
Protective helmet
•
Hearing protection
•
Protective goggles or a visor
•
Breathing mask
•
Heavy-duty, firm grip gloves.
•
Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
– 5
English
Advertisement
Table of Contents
