Table of Contents
Advertisement
7. Media Loading
Loading Labels
Loading Labels from Roll
1
2
3
4
Fig. 7c Label Loading in Tear-off Mode
1. Open the cover (1).
2. Loosen the knurled screw (10), swing the media retainer (11) upwards and
3. Place the media roll (8) onto the media hub (9) and unwind a strip of
40
slide it out as far as possible.
If you are using material with the same width as the previous material, just
swing the media retainer (11) upwards.
media (4) from the roll. When operating in the rewind or peel-off mode
make sure that the strip is long enough to reach the internal rewinder by
guiding the strip through the whole print mechanism and underneath of it.
Make sure that the labels between the media hub and the print
mechanism are facing up. Slide the roll onto the media hub (9) until its
stops.
5
6
7
Transfer Printer THT-BP Precision
12
11
10
9
8
Advertisement
Table of Contents
