Table of Contents
Advertisement
Power
The printer is equipped with a universal power supply and can be operated at a voltage of
100 to 240 V~, 50/60 Hz.
To connect power and turn on the printer:
1. Connect the power cord to the power supply provided.
2. Connect the power supply to the printer and plug into an electrical outlet.
3. Press the power button on the front of the printer.
4. Install the label supply following the instructions
Software for Creating Labels
Install labeling software on your computer, set up the connection to the printer, then use the software
to design labels and send them to the printer.
Brady Workstation software provides a variety of apps to simplify label creation for specific purposes. It
also provides easy-to-use apps for custom label design. The printer comes with a license for the Brady
Workstation Product.
To install Brady Workstation:
1. Make sure your computer is connected to the internet.
2. Go to workstation.bradyid.com/SFID.
3. Follow the instructions on the screen to download and install the software.
4. When you run the software and open an app that requires activation, follow the instructions on
the screen to activate the software. Use the license ID and password on the printed insert that
came with the printer.
For other Brady Workstation software or additional licenses, go to
contact your Brady representative.
BradyJet J4000 User Manual
CAUTION! Use only the adapter and power cord provided with the printer.
CAUTION! Make sure the outlet is grounded.
"Installing Label Supply" on page
www.workstation.bradyid.com
Registration
Power
11.
or
9
Advertisement
Table of Contents
