Table of Contents
Advertisement
7. Media Loading
7. Media Loading
General Information
1. Pay attention to the specifications of the material indicated in chapter 1 .
2. When using the printer for the first time or using label media with a different
width, make sure to adjust the printhead support as well as the position of
the label edge sensor.
3. There is a warning label (1) on the ribbon supply hub which will be visible if
the material is getting low. When that warning label is visible, prepare to
replace the ribbon material soon.
4. If you do not use the printer for an extended period of time, lift the printhead
to avoid possible flattening of the print roller.
5. If you want to move or ship the printer to another location, remove the
media and the ribbon from the printer.
Fig. 7a Warning label
38
1
Transfer Printer THT-BP Precision
Advertisement
Table of Contents
