Technical Specifications; Ff Module 600W-50-200Khz; Inserting/Removing Procedure; Inserting The C-Card - VDO MAP 7w Plus GPS User Manual

TECHNICAL SPECIFICATIONS

Operating Voltage
♦
Power consumption
♦
Interface
♦
Autopilot Interface
♦
Display
♦
Display Resolution
♦
Cartography
♦
Operating temperature range : 0/+55°C (32/+131°F)
♦
Memory
♦
Keyboard
♦
Weight
♦
FF MODULE
TECHNICAL SPECIFICATIONS
Power Output
♦
Max Depth
♦
Automatic Recognition of the AIRMAR "X-DUCER ID" transducers for best
♦
performance
Advanced Digital Signal Processing
♦
Speed & Temperature Sensor (if available on transducer)
♦
Alarms (shallow water, depth, Fish, temp)
♦
Trip Log, Fish Symbols
♦
STC, Interference Rejection, Automatic noise reduction
♦
A-scope, White Line, Zoom x2/x4
♦
Auto range/gain/frequency/shift/ping rate
♦
When the package containing the chart plotter is first opened, please check it for
the following contents (if any parts are missing contact the dealer the chart plot-
ter was purchased from):
"Quick disconnect" bracket and its protective cover
♦
Chart plotter's protective cover
♦
Fuse 3.15 Amp. + fuseholder
♦
User Manual
♦

INSERTING/REMOVING PROCEDURE

Inserting the C-CARD

Open the door, hold the C-CARD by the long side so that you can see the label and
gently push the C-CARD into the door slot (1). Close the door pushing the C-CARD
in as far as it will go to hold fixed into the chart plotter slot (2). When finished the
door must be right closed (3).
96
600W-50-200KHZ
: 10 - 35 Volt dc
: 12W average; 27W max peak
: NMEA-0183
: NMEA-0180, NMEA-0180/CDX, NMEA-0183
: Color Sunlight Viewable LCD
: 800 x 480 pixels
: C-MAP B J
Y EPPESEN
: Non volatile
: Silicon rubber, backlight
: 1,3 kg
: 600W (4800Wpp), 50/200KHz Dual Fre-
quency
: 213m (700Ft) at 200kHz, 457m(1500Ft)
at 50kHz
(active area 7")
C-CARD
User Manual