Installing The Smart Gps External Map; Installing; W Plus Gps - VDO MAP 7w Plus GPS User Manual

Installing the Smart GPS External
MAP 7 P
W LUS

Installing

Choose a location for the antenna that has a clear view of the sky. Ensure there
are no major obstructions or fixtures in the immediate proximity to the antenna.
The antenna relies on direct "line of sight" satellite reception. If you are unsure
that the chosen location is suitable it may be advisable to mount the antenna in a
temporary manner to verify correct operation. The thread used on the antenna
(1", 14 TPI) is an industry standard thread used on a wide range of mounting
brackets, including the swivel joints commonly used for angled surfaces. However
due to the manufacturing process of these mounting brackets you may see that
there is some slop when tightening down the antenna to the bracket. This is of no
concern however as the antenna must be tightened until the antenna stops rotat-
ing on the antenna mounting bracket.
The antenna design also allows an easy flush mounting.
1. Apply the adhesive mounting template sheet in the area that was veri-
fied to receive satellite signal well
2. Then, following template instruction, drill a 1" (25mm) hole and three
0.13" (3.2mm) holes
User Manual
GPS/MAP 11
Installing GPS Antenna (I)
Installing GPS Antenna (II)
E P GPS/MAP
CS LUS
P GPS
CX LUS
115