Advanced Settings; Setup Menu; Navigate Menu - VDO MAP 7w Plus GPS User Manual

Screen Amplifier
E
Depth Window
E
NOTE If the Expert Function Distance
change according to the selected Speed Unit, see the following table:
Also if the Expert Function Altitude
will change according to the selected Depth Unit, see the following table:
4.4

ADVANCED SETTINGS

The Advanced options are arranged in sub-menus. See Par. 2.5 on Simulation
menu.
[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER]

Setup menu

To allow you to change how the chart plotter displays information.
[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER] + "SETUP" +
[ENTER]
Time Reference
Time Format
E
Date Format
E
Beeper
Back Light Timeout
E
Auto Info E
Keel Offset
E
LOG Calibration
E

Navigate Menu

To handle the functions related to navigation.
[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER] + "NAVIGATE" +
[ENTER]
Coordinates System
Fix Datum
E
User Manual
: Allows, when it is On and Home mode is set, to place map on the screen related to the fix
position and direction, so the map shown is that before the ship.
: Turns On/Off the displaying of the Depth Window on the screen. When the Depth Window
is set On and depth value is received from an echosounder, the depth value and unit are
shown on the screen.
has not been activated, the Distance Unit will
E
Speed Unit
kts
Mph
Kph
Depth Unit
m
Ft
FM
: Allows switching between UTC or local time, by entering the Local Time offset.
: Selects the format for the time between 12 and 24 hours.
: Selects the Date Format between MM-DD-YY (month-day-year) and DD-MM-YY (day-
month-year).
: Enables or disables the single audio beeps emitted any time the chart plotter keypad is
pressed. If the incorrect key is pressed or the function required cannot be executed, the
chart plotter emits three beeps.
: Sets the time value among 1, 3, 5, 10 Min: after this time when no key is pressed, the screen
and keyboard backlight is turned Off.
: Allows displaying information on cartographic object when the cursor is placed on it. The
Automatic Info On Points shows information when the cursor is placed on points (as Port
Services, Tides, lights, wrecks, rocks, buoys, beacons, obstructions, land markers, etc.).
The Automatic Info On All shows information when the cursor is placed on points, on lines
(as Depth contours, Traffic Separation, Territorial Sea, Cartographic Lines etc.) on areas
(Depth, Built-up, Sea, Attention, Restricted etc.) and on names (on the beginning of the text
-hot spot- or on any of the characters of the name -name message box-). The details on
Land, Source of Data, Cartographic Area and Spot Soundings are not shown.
: Adjusts the Depth Sensor Offset to display Depth under Keel. Selectable in the Range of
0.0 to 9.9m.
: Adjusts the Log Sensor to display Speed through the Water. Selectable in the Range of
0.1 to 9.9 %.
: The possible choices are ddd mm ss (degrees, minutes and seconds), ddd mm.mm
(degrees, minutes and hundred of minutes), ddd mm.mmm (degrees, minutes and
thousands of minutes).
: Sets the datum reference used by the GPS receiver connected to (or integrated in) the chart
plotter so that the chart plotter converts the position received from the GPS to the Map
Distance Unit
nm
Sm
Km
has not been activated, the Altitude Unit
E
Altitude Unit
m
Ft
FM
49