Finding Lakes By Name; Finding Points Of Interest; Finding Coordinates; Alarms - VDO MAP 7w Plus GPS User Manual

Then choose the lake you want and press [ENTER]: the Full Info page is shown.

Finding Lakes By Name

To select the lakes By Name function following the procedure:
[MENU] + "FIND" + [ENTER] + "LAKES BY NAME" + [ENTER]
Shows the list of all lakes stored on the C-CARD in alphabetic order. Pressing
[MENU] to insert the Lake name.

Finding Points Of Interest

Searches for nearest Points Of Interest (POI):
[MENU] + "FIND" + [ENTER] + "POINTS OF INTEREST" + [ENTER]
A sub-menu is opened to find different categories of Points Of Interest.

Finding Coordinates

To center the map at given coordinates:
[MENU] + "FIND" + [ENTER] +"COORDINATES" + [ENTER] + use the cursor
to insert coordinates + [CLEAR]
3.8

ALARMS

The chart plotter provides alarms for various functions. You can enter the desired
alarm range for each function.

Arrival Alarm

To set an acoustic alarm to sound when the vessel is approaching the destination.
[MENU] + [MENU] + "ALARMS" + [ENTER] + "ARRIVAL ALARM" + [ENTER]

XTE Alarm

To set an acoustic alarm to sound when the vessel is deviating from a defined course.
[MENU] + [MENU] + "ALARMS" + [ENTER] + "XTE ALARM" + [ENTER]

Anchor Alarm

To set an alarm to sound when the ship moves off the current ship's position location.
[MENU] + [MENU] + "ALARMS" + [ENTER] + "ANCHOR ALARM" + [ENTER]
NOTE By the time the Anchor Alarm is set the current ship's position is saved as
origin position. The alarm goes off when the ship moves away from the origin
position more than the entered alarm range.

Depth Alarm

To set an acoustic alarm to sound when the received depth value (from the depth
transducer) is too shallow.
38
Fig. 3.7a - Nearest Lakes list
User Manual