TECHNICAL SPECIFICATIONS
Operating Voltage
♦
Power consumption
♦
Interface
♦
Autopilot Interface
♦
Display
♦
Display Resolution
♦
Cartography
♦
Operating temperature range : 0/+55°C (32/+131°F)
♦
Memory
♦
Keyboard
♦
Weight
♦
When the package containing the chart plotter is first opened, please check it for
the following contents (if any parts are missing contact the dealer the chart plot-
ter was purchased from):
"Quick disconnect" bracket and its protective cover
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
MAP 7w Plus GPS Flush mounting kit
♦
MAP 7w Plus GPS Smart DGPS WAAS Receiver with cable 15 mt/45 feet
♦
User Manual
♦
INSERTING/REMOVING PROCEDURE
Inserting the C-CARD
Open the door, hold the C-CARD by the long side so that you can see the label and
gently push the C-CARD into the door slot (1). Close the door pushing the C-CARD
in as far as it will go to hold fixed into the chart plotter slot (2). When finished the
door must be right closed (3).
Removing the C-CARD
To remove the C-CARD inserted in the chart plotter open the door (1). The C-CARD
will eject out of the chart plotter slot remaining fixed into the door (2). Then
remove the C-CARD from the slot (3).
90
: 10 - 35 Volt dc
: 11 W max
: NMEA-0183
: NMEA-0180, NMEA-0180/CDX, NMEA-0183
: Color Sunlight Viewable LCD
: 800 x 480 pixels
: C-MAP B
J
Y
EPPESEN
: Non volatile
: Silicon rubber, backlight
: 1,1 kg
(active area 7")
C-CARD
User Manual