Technical Specifications; Inserting/Removing Procedure; Inserting The C-Card; Removing The C-Card - VDO MAP 7w Plus GPS User Manual

TECHNICAL SPECIFICATIONS

Power consumption
♦
Interface
♦
Autopilot Interface
♦
Video Output
♦
Display Resolution
♦
Cartography
♦
Operating temperature range
♦
Memory
♦
Keyboard
♦
Weight
♦
When the package containing the controller is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
External bracket
♦
Power supply and I/O (CBC0FS0804) I/O, cable CBC0FS0603
♦
AUX IN I/O cable 1,5 mt/5.9 feet
♦
Video Output cable
♦
Fuse 1A (2 pcs) + cable fuse holder (2 pcs)
♦
User Manual
♦

INSERTING/REMOVING PROCEDURE

Inserting the C-CARD

Hold the C-CARD by the short inclined side so that you can see the C-MAP B
J label. Open the C-CARD slot's door pressing (1) to the bottom (2). Gently
EPPESEN
push the C-CARD into one of the two slots; push the C-CARD in as far as it will go
(3), then move it to the bottom (4) to hold fixed into the slot.
1

Removing the C-CARD

Open the C-CARD slot's door pressing (1) to the bottom (2). Press lightly (3) the
C-CARD you wish to remove and move it to the top (4) until you hear a click: the
C-CARD will eject out of the slot (5).
1
108
2
2
: 0.25 A max, @ 12 V
: NMEA0183
: NMEA-0180, NMEA-0180/CDX, NMEA-
0183
: VGA compatible
: 640x480 or 800x600 or 1024x768
pixels user selectable
: C-MAP B J
Y EPPESEN
: 32/131 °F (0/+55 °C)
: Non volatile with battery backup
: Silicon rubber, backlight
: 950 gr.
4
3
4
3
C-CARD
User Manual
Y
5