Samsung SHR-2160 User Manual page 83

SHR-2160/2162/2080/2082 USER'S MANUAL
Video Recording Button
- If you select a channel in the playback and click the "Save" button, the video will
be saved in a file format with the extension of * .dvr in a designated folder of your
PC.
- The name of the directory in which an image will be saved, the file name, and the
image save length shall be set up at the Setup Mode
- The video length to be saved can be set from one minute to 10 minutes.
- The saved video can be played in the Local mode of Search mode.
- Click the button again to stop recording. However, manual suspension is
prohibited for 10 seconds after recording started.
Audio Volume Control Button
- You can control the audio volume of channel in the playback or set to mute for it.
- You can adjust the audio volume from 0 to +10.
Video Brightness/Contrast Control button
- Select the channel in the playback and use the control button(+,-) to adjust the
brightness or contrast of video.
- The default value is set to +5.
- You can adjust the brightness or contrast from 0 to +10.
- Press the button to recover the default value.
Note Note
The adjusted Audio volume, brightness, and contrast values will be saved in your PC
and remain unchanged even if you terminate Smart Viewer and restart it.
* OS of Windows 98 or ME do not support this Brightness/Contrast function.
* Brightness and contrast adjustments does not work for models
SHR-2160/2162/2080/2082.
9-49
Viewer Setup.
PTZ Camera Control Buttons
- Select a channel connected to PTZ Camera to control PTZ related functions.
- PAN Left / Right
- TILT Up / Down
- Diagonal Control
- The channel under PTZ control will be displayed in the center of the button.
3 1
2
!@ ZOOM IN / OUT
# POWER ZOOM : Click P button to activate POWER ZOOM.
- POWER ZOOM is a function to zoom in or zoom out the video screen by clicking the
screen.
- After POWER ZOOM is dominant, ZOOM IN / OUT will zoom in or out the video
screen.
- POWER ZOOM Operation Procedure : Click POWER ZOOM
OUT Click ZOOM IN or OUT zone in the video screen
activated in the clicked zone.
Note Note
The PAN / TILT / ZOOM function is supported to all the cameras.
But, POWER ZOOM is supported only by Samsung Smart Dome Camera, and
assured to the operation of TILT below 45°.
Select ZOOM IN or
ZOOM IN / OUT will be
9-50