SHR-2160/2162/2080/2082 USER'S MANUAL
Smart Viewer Version
- Smart Viewer Version and system requirements are displayed.
DVR Version
SHR-2160/2162/2080/2082
- DVR Version not only displays the connected DVR(SHR-2160/2162/2080/2082)
name if any DVR(SHR-2160/2162/2080/2082) is being connected with Smart
Viewer or the name of DVR(SHR-2160/2162/2080/2082) composing a site if any
DVR(SHR-2160/2162/2080/2082) is being connected with the site but also
displays DVR(SHR-2160/2162/2080/2082) S/W version.
- When the smart viewer does not connected with the DVR
(SHR-2160/2162/2080/2082), it displayed with a gray and "Not connected" is
displayed in the status.
- Each DVR Version has a check box, which is used for S/W Upgrade.
DVR(SHR-2160/2162/2080/2082) S/W Upgrade
- Smart Viewer upgrades on-line DVR(SHR-2160/2162/2080/2082) S/W remotely.
! Select a DVR(SHR-2160/2162/2080/2082) to be upgraded among
DVRs(SHR-2160/2162/2080/2082) on line.
SHR-2160/2162/2080/2082
9-37
@ Click the following button to open the "SHR-2160/2162/2080/2082 Firmware"
file in format.
2160/2162/2080/2082
2160/2162/2080/2082
# Press the [Upgrade] button to transmit a file to the selected DVR(SHR-
2160/2162/2080/2082) and start the upgrade of DVR(SHR-
2160/2162/2080/2082) S/W.
$ The progress of file transmission and upgrade is displayed at the bottom.
Caution
Caution
Be sure to suspend all the DVR system functions in action such as recording, MENU,
backup, and playback before you upgrade the DVR(SHR-2160/2162/2080/2082)
S/W.
Never try to turn the DVR(SHR-2160/2162/2080/2082) power off during the S/W
upgrade.
The S/W upgrade requires about 5 minutes.
If the S/W upgrade is suspended accidentally, the previous S/W will be left intact.
Note
Note
You may download the upgraded firmware for the s/w of the DVR
(SHR-2160/2162/2080/2082) from the CCTV part at www.sec.co.kr.
9-38