Samsung SHR-2160 User Manual page 30

SHR-2160/2162/2080/2082 USER'S MANUAL
Note
Note
[Date/Time Change]
Pressing "OK" after you change date and time, you will be asked by a pop-up window
if you really confirm the change. Here, press "Yes" to change the time. Since Date/Time does
not change in backup process, be sure to stop the backup process before you change
Date/Time. If the date and time are changed, the system restarts.
Caution
Caution
[Date/Time Change]
If the Date/Time changes to the original value, the data recorded before the change may be
deleted. For example, if the time is changed from 8 am to 7 am, all the data recorded between
7 am and 8 am will be deleted.
Date Format
The system supports 3 formats, YYYY-MM-DD / DD-MM-YYYY / MM-DD-YYYY.
Time Format
The system supports 2 formats, 24 Hour / 12 Hour(AM/PM).
Language
After selecting a language, OSD is expressed in the selected language.
The available language is added in the list.
DST(Daylight Saving Time)
DST sets the watch one hour faster than the local standard time.
This menu makes the system count for DST in DST regions.
The system goes one hour faster and reboots at the setup date.
If the DST is Off, it does not operate. And it is impossible to enter the right date
menu. To setting the DST, enter the start time on the left and the end time on the
right of '~'. DST is allowed to set Month/Date/Time only.
Year/Minute/Second remains inactivated.
Note
Note
[On DST Setup]
Backup in progress will be cancelled. Recording in progress will be suspended for a moment
until rebooting.
Caution
Caution
[On DST Operation]
As the system goes one hour earlier, the data recorded since an hour ago will be deleted.
As DST activates at the preset time, you are recommended to take the utmost care of
preventing any trouble incurred by data deletion or rebooting.
5-3
Password
The Default Password is 4321.
New Password
This is used to change the system password inside SHR-2160/2162/2080/2082.
You are allowed to create a password up to 4 digits. Press the "Enter" key and a
channel button from 1 ~ 4 at the left. Press the "Enter" key after change to move
to "New Password Confirm".
New Password Confirm
This confirms a new password. You shall be obliged to input New Password in
the above row first. Without New Password input, New Password Confirm input
has no effect.
Password Setup
If it is set to On, a window for asking the password pops up when pressing the
menu button.
If it is set to Off, you are allowed to enter the menu mode without being asking the
password when you press the menu button.
Record Lock Setup
When setting the record lock to "on", pressing the record button causes the
password window to come up.
You can also set record lock button to on/off from the remote control.
All Key Lock On
If you select this, the system will enter the Live Mode immediately. If you press any
button in the front, the Password window will pop up. If the correct password is
input, the lock function is cancelled after popping up a message for the
cancellation of Key Lock.
Note Note
[All Key Lock On]
If you select this, the system will change to the Live Mode immediately and keys will be
locked.
5-4