Samsung SHR-2160 User Manual page 32

SHR-2160/2162/2080/2082 USER'S MANUAL
System Information and Setup
Software Version
: Displays the current version. Setup is not available.
Broadcast Format
: Displays the current Format(NTSC/PAL) . Setup is not available.
Mac Address
: 6 Byte hardware address. Setup is not available.
Device Erase
This erases the data in ATA / USB HDD / USB memory. Click the checkbox of the device
that you want to erase and press "OK" You are not allowed to erase the data in Backup
progress.
USB S/W Upgrade
You can update the program by use of USB device. If there is no device, "USB S/W
Upgrade fail" window pops up.
In the case of 2080/2082, the software version comes up as SHR208X-V1.2.5-
2005XXXXXX.
Note 1
Note 1
[Internal HDD]
This is a physical hard disk connected with the IDE cable inside the SHR2160/2162/2080/2082 main
body, and stores data.
[External HDD]
This is a physical hard disk connected with the port and terminal in the back of the
SHR2160/2162/2080/2082 main body, and stores data.
This can be used as Extended HDD or Backup HDD.
- Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place
of Internal HDD.
- Backup HDD : Backs up the data recorded in the set.
Note 2 Note 2
[ATA]
Usage : Internal HDD
This is a physical hard disk connected with the IDE cable inside the SHR2160/2162/2080/2082 main
body.
[USB]
Usage : External HDD(Extended HDD or Backup HDD)
It is physical hardware that is connected to the front/back part of the SHR-2160/2162/2080/2082 with
the USB port.
5-7
Caution
Caution
[Device Erase]
Data will not be deleted in the backup mode.
Please be sure to stop the backup before you delete a data. In the recording mode, suspend
the recording and delete a data.
Caution
Caution
[USB S/W Upgrade]
Download the software to upgrade at http://www.sec.co.kr, CCTV Part.
If the USB memory to upgrade has a format not being supported by DVR set, the upgrade is
impossible.
In this case, use the "device erase" of menu 5-7 system information and setup.
Only one file to upgrade is allowed in the USB Memory.
HDD Setup
HDD Information
Displays the number, capacity, and status of ATA and USB device. Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
External HDD Setup
1. Backup/External type
The USB's usage can be set up as below.
Not Defined Appears when the usage of connected HDD is not defined.
You can set to External or Backup type.
No Device Appears when there is no HDD connected. You are able to connect it by
pressing the right connection TAB after connecting HDD
External Appears when the connected HDD is set to External type. It may used as a
backup HDD if you press the "Enter" key and turn to Backup.
Backup Appears when the connected HDD is set to Backup. If you press the "Enter"
key and turn to External(Extend), it can be used as an External HDD.
5-8