Samsung SHR-2160 User Manual page 71

SHR-2160/2162/2080/2082 USER'S MANUAL
Video Recording
! Naming
- Being connected to SHR-2160/2162/2080/2082 in the monitoring or search
mode, you can save the video displayed with * .dvr file and name it.
- If you set to "Camera No. + Serial No.", the file name depends on the camera
number and serial number. If set to "Camera No. + Date", it depends on the
camera number, current date, and time.
@ Location
2160/2162/2080/2082
- When connecting with SHR-2160/2162/2080/2082 in the monitoring or search
mode and saving the video displayed, it sets the directory where * .dvr file to be
saved.
- The current default directory is "Directory that installs Smart Viewer
Program \ video \ * .dvr".
# Recording Time
- When connecting with SHR-2160/2162/2080/2082 in the monitoring or search
mode and saving the video displayed, it sets the maximum saving time.
- The saving time can be set from 1 to 10 minutes. If the saving time exceeds the
preset time, the saving stops automatically.
File Converting
[JPEG]
! Location
2160/2162/2080/2082
- You can convert the file saved in your PC with * .dvr format into JPEG file.
The frames composing * .dvr file will be converted into JPEG file.
Sets the directory in which the converted JPEG file will be saved.
- The current default directory is "Directory that installs Smart Viewer
Program \ frame".
9-25
Sequence Time
- When connecting with SHR-2160/2162/2080/2082 in the monitoring mode, set
the auto sequence time if the auto sequence is set. The time can be set from 10
to 20 minutes.
OSD Display
- Sets if OSD shall be displayed on each channel of Smart Viewer.
- Whether you check "Enable" or not, OSD will appear or not.
However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not
be affected by the OSD condition.
Callback Connection
- Sets the port for Callback connection.
Auto Connection
- Sets if the smart viewer is automatically connected to
SHR-2160/2162/2080/2082 or site at the initial operation.
- If you check "Auto Connection On", the names of SHR-2160/2162/2080/2082
and Site currently registered at the DVR/Site list will be displayed in the
following list. If you select one from the list, the smart viewer will connect to the
selected SHR-2160/2162/2080/2082 or Site when it operates later.
Language
- Sets the language used in the SmartViewer.
9-26