Dcon Check - Canon imageFORMULA P-215 Service Manual

CHAPTER 5 TROUBLESHOOTING
6) After the adjustment is complete, the
completion screen is displayed. Click
[OK].
Figure 5-222
5-12

8. Dcon Check

hardware inside of the machine.
1) On the service screen, select [Dcon
2) The [DCON Check] screen is displayed.
Note: When this machine enters the service
Note: The state (Auto Start On or Auto Start
COPYRIGHT © CANON ELECTRONICS INC. 2011
This mode checks operations of each
Basic screen
Check].
Figure 5-223
Select a menu to execute on this screen.
Figure 5-224
mode, the tray switch (power switch) is
disabled. The power is not switched
OFF even when the pickup tray is
closed.
Off) of the Auto Start switch appears
on the upper right corner of the screen
when the service tool is started.
CANON P-215 FIRST EDITION