Motor Unit - Canon imageFORMULA P-215 Service Manual

With parts catalog
Hide thumbs Also See for imageFORMULA P-215:
Table of Contents

Advertisement

4) Remove the light guide
the registration roller
Figure 3-306
Notes on assembling
Push the fitting parts of the shaft support
sufficiently, and they must not be lifted.
When the upper sensor PCB is assembled,
insert projections into positioning holes (3
places) and hold them with the PCB
holders of the lower cover
Figure 3-307
COPYRIGHT © CANON ELECTRONICS INC. 2011
1
. Then remove
2
.
1
.
CANON P-215 FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY

4. Motor Unit

1) Remove the left cover.
(Page 3-2)
2) Remove the rear cover.
(Page 3-4)
3) Remove the gear
(with a bearing) . And remove 2 screws
(M3x4) and FFC
motor unit
5
.
Figure 3-308
1
and the gear
4
, then remove the
3-11
2
3

Advertisement

Table of Contents
loading

Table of Contents