Configuring The Canon Cr-50 Check Scanner - Canon CR-50 User Manual

Canon CR-50 User Guide

Configuring the Canon CR-50 Check Scanner

1. Click on the Ranger image to select your Canon CR-50 Check Scanner. If you have a check loaded in the
scanner, it will scan automatically and the check information and image will be displayed.
2. Click the Use This Unit button at the upper right. This will return you to the previous screen, and also
pull another item through your scanner.
3. At this point, the scanner is ready for use in the module in which it was configured. Click OK, if
applicable.
Page 10